How To Make a Wood Cutting Board

Ask a woodworker if they’ve made a cutting board and nearly all of them will say they have in the past and still do to this day. For many it’s their first woodworking project. For others it’s their go-to project when they’re looking for an excuse to get into the shop. Every kitchen needs a cutting board and nearly every shop is equipped to make them.

Cutting boards can be as simple as a single wood board or contain dozens of pieces with multiple wood species and shapes. Some require very few woodworking tools and others require a whole shop full of tools. The beauty of cutting boards is that no matter what your skill level or how many tools you have, you can make beautiful, useful cutting boards.

What You Need to Know About Making Cutting Boards

  1. Cutting Board Book with 15 Projects for Woodworkers
  2. Cutting Board Video Tutorials
  3. Choosing The Best Wood for Cutting Boards
  4. How to Finish a Cutting Board with Food Safe Finish

Get the Only Book on Making Cutting Boards! Includes 15 Projects You Can Make and Sell!

The projects in this book range from simple to complex and the finished designs can be tailored to suit any style or taste. Best of all, upon completion, each project can be proudly used or given to that special loved one on your gift list. Extensive photography and clear, concise instructions make even the most challenging techniques easy to understand and conquer. Each book is signed and shipped directly from me.

Make Your Own Cutting Boards (SIGNED)
22.95
Quantity:
Add To Cart

Cutting Board Video Tutorials

Making an end grain cutting board from scraps. This cutting board project comes from my book.

How to make a cutting board with a decorative inlay. It’s easier than you may think!

Easy to make cutting board with a cutout for a strainer. Perfect for using over your sink to cut vegetables and fruit.

How to make a wooden pizza peel. A quick and easy woodworking project.

Making an Alaskan ulu knife out of sheet metal and wood with a mating cutting board.

Choosing the Best Wood For Cutting Boards

When choosing woods for cutting boards, look for dense hardwoods, as they are more durable and can stand up to kitchen tasks. You should also lean toward woods that don’t contain an excess of natural oils. Some people have a sensitivity to these oils, and you don’t want your cutting board to alter the taste of your food.

Most people also stay away from spalted and reclaimed woods because you don’t always know what you’re dealing with. If you do use spalted or reclaimed woods, be sure to seal the surface so that it won’t a affect the food in any way. In general, North American hardwoods like maple, walnut, and cherry are commonly used in cutting boards, and rare exotic woods should be avoided. Whatever woods you choose, do your research on food safety before venturing into the unknown.

How to Finish a Cutting Board with a Food Safe Finish

  1. Sand
  2. Raise the Grain
  3. Remove the Raised Grain
  4. Oil the Cutting Board
  5. Even More Oil
  6. Melt Wax and Mix
  7. Applying Wax Mixture
  8. Buff

There are many ways to finish a cutting board and no finish is maintenance free. The more you use the cutting board, the more you’ll need to apply more finish. The finish I like to use takes a two-step process. The first step is applying mineral oil that seeps deep into the wood, and the second step adds a protective film on top of the surface.

1. Sanding Cutting Boards

Sanding Cutting Boards

Start with smooth stock. Sand everything down to 220 grit. A good sanding job pays off well on small jobs that beg to be touched.

 

2. Raise the Grain

Raising the Grain

Use a wet paper towel to raise the grain. The moisture causes some of the wood fibers to swell.

 

3. Remove the Raised Grain. 

Sanding Cutting Boards

Go back and sand everything smooth again with 220-grit sandpaper. This second sanding won’t take long to smooth everything back out. This step will keep the cutting board smooth after use and washing.

 

4. Oiling the Cutting Board

cutting board oil

Coat the entire cutting board with a heavy dose of white, food-grade mineral oil.

 

5. Even More Oil

Cutting board mineral oil

And again . . . Some woods and all end grain cutting boards soak up a lot of mineral oil. Keep applying more and more until the oil sits on the surface. Allow the oil to sit for a couple of hours before wiping away any excess.

 

6. Melt Wax and Mix

Paraffin wax for cutting boards

For the second coat, melt paraffin wax on the stove using the lowest heat setting. As the wax melts add a bit of the white, food-grade mineral oil. You’ll want about a 50/50 mix.

 

7. Applying Wax Mixture

cutting board finish

Finish while it’s hot. While the wax mixture is still warm, apply a heavy coat to the cutting board. Let the wax set for a couple of hours. This will leave a film on the surface but it’s easily removed later.

 

8. Buff it out. 

cutting board finishes

Use a soft cloth to buff away the wax. This coat gives your cutting board a protective finish and a satin sheen.